How To Connect The Lithium Battery To REVO Series Solar Inverter

Use a 14mm socket wrench to remove the screws at the positive and negative conductive steel sheets of the battery, Please keep the screws

The positive pole of the cable is inserted under the left waterproof interface, The negative pole of the cable is inserted from the bottom of the waterproof interface on the right

Insert the positive electrode first, then hang it on the left conductive steel sheet, Then insert the negative electrode and hang it on the right conductive steel sheet

Reinstall the screws you just removed, Now install the battery cable, The positive terminal of the cable is installed at the red positive connection of the battery

The negative terminal of the cable is installed at the black negative connection of the battery, First unscrew the red positive connection screw

Then unscrew the black negative connection screw, Install the positive and negative cables in the corresponding positions

Then tighten the screw at the positive connection, Tighten the negative terminal screw

Now, We connect the cables from the inverter to the battery, Just plug the red terminal connectors of the two cables into each other

Turn on the battery switch, Press the first button to enter the menu, Press the second button to enter the current and voltage display page

Turn on the inverter switch, The connection between the inverter and the battery is completed